For more information on permissions, see What are permissions? You might get this error if the shortcut or installation is attempting to access a location that is not currently available such as a networked or a removable drive. Check the path of the file that Windows cannot access and make sure that the location is accessible. You can also receive this error if the file has been moved or deleted. Browse to the location of the file and make sure the file is in that location.
You can also receive this error if the shortcut or other file type has become corrupt. You can check for corruption in shortcuts by recreating the shortcut. To do this, see Create or delete a shortcut. If an application or other type of file is corrupt it may be necessary to repair the application to resolve the issue.
In some cases the file may be blocked by Windows. An attempt to create space in the transactional resource manager's log failed.
The failure status has been recorded in the event log. The object file, stream, or link that corresponds to the handle has been deleted by a transaction savepoint rollback. The specified file miniversion was found but has been invalidated. The most likely cause is a transaction savepoint rollback. The handle has been invalidated by a transaction.
The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint. The transaction outcome is unavailable because the resource manager responsible for it is disconnected. The file cannot be opened in a transaction because its identity depends on the outcome of an unresolved transaction. The operation cannot be performed because another transaction is depending on this property not changing.
The operation would involve a single file with two transactional resource managers and is, therefore, not allowed. The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed. A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution. Promotion was required to allow the resource manager to enlist, but the transaction was set to disallow it.
This file is open for modification in an unresolved transaction and can be opened for execute only by a transacted reader. The request to thaw frozen transactions was ignored because transactions were not previously frozen. The target volume is not a snapshot volume. This operation is valid only on a volume mounted as a snapshot.
The savepoint operation failed because files are open on the transaction, which is not permitted. The call to create a transaction manager object failed because the Tm Identity that is stored in the log file does not match the Tm Identity that was passed in as an argument.
There is no valid data. The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources. The transactional resource manager had too many transactions outstanding that could not be aborted. The transactional resource manager has been shut down. The specified resource manager was unable to create an enlistment because its associated transaction manager is not online.
The specified transaction manager was unable to create the objects contained in its log file in the Ob namespace. Therefore, the transaction manager was unable to recover. The call to create a superior enlistment on this transaction object could not be completed because the transaction object specified for the enlistment is a subordinate branch of the transaction. Only the root of the transaction can be enlisted as a superior.
Because the associated transaction manager or resource manager has been closed, the handle is no longer valid. The specified operation could not be performed on this superior enlistment because the enlistment was not created with the corresponding completion response in the NotificationMask.
The specified operation could not be performed because the record to be logged was too long. This can occur because either there are too many enlistments on this transaction or the combined RecoveryInformation being logged on behalf of those enlistments is too long.
The kernel transaction manager had to abort or forget the transaction because it blocked forward progress. The handle is no longer properly associated with its transaction. It might have been opened in a transactional resource manager that was subsequently forced to restart.
Please close the handle and open a new one. The specified operation could not be performed because the resource manager is not enlisted in the transaction. The log service encountered an attempt to read from a marshaling area with an invalid read context.
The number of reserved log records or the adjustment of the number of reserved log records is invalid. Records were appended to the log or reservation changes were made, but the log could not be flushed. The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available. The next time you reboot the computer, a dialog box will allow you to upload data about this failure to Microsoft.
Minifilters should never return this value. Posting this operation to a worker thread for further processing is not safe at this time because it could lead to a system deadlock. The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is loaded as a driver.
The filter is not ready for attachment to volumes because it has not finished initializing FltStartFiltering has not been called. The filter must clean up any operation-specific context at this time because it is being removed from the system before the operation is completed by the lower drivers.
The Filter Manager had an internal error from which it cannot recover; therefore, the operation has failed. This is usually the result of a filter returning an invalid value from a pre-operation callback. The object specified for this action is in the process of being deleted; therefore, the action requested cannot be completed at this time. The name requested was not found in the Filter Manager name cache and could not be retrieved from the file system.
The provided monitor descriptor block is either corrupted or does not contain the monitor's detailed serial number. The provided monitor descriptor block is either corrupted or does not contain the monitor's user-friendly name. An object being referenced has already reached the maximum reference count and cannot be referenced further. The specified VidPN topology is valid but is not supported by this model of the display adapter. The specified VidPN topology is valid but is not currently supported by the display adapter due to allocation of its resources.
The specified VidPN modality is not supported for example, at least two of the pinned modes are not co-functional. The miniport does not have a recommendation regarding the request to provide a functional VidPN given the current display adapter configuration. The system failed to determine a mode that is supported by both the display adapter and the monitor connected to it.
The number of video present targets must be greater than or equal to the number of video present sources. Two or more of the specified resources are not related to each other, as defined by the interface semantics. The specified content geometry transformation is not supported on the respective VidPN present path.
Only one unassigned mode set can exist at any one time for a particular VidPN source or target. The specified primary surface has a different private-format attribute than the current primary surface. The miniport requested that augmentation be canceled for the specified source of the specified VidPN's topology. The client VidPN is not set on this adapter for example, no user mode-initiated mode changes have taken place on this adapter.
An attempt was made to start a lead link display adapter when the chain links had not yet started. An attempt was made to turn on a lead link display adapter when the chain links were turned off.
The adapter link was found in an inconsistent state. An array passed to a function cannot hold all of the data that the function wants to put in it. This function failed because the GDI display device passed to it was not attached to the Windows desktop. The PVP does not support mirroring display devices because they do not have any protected outputs. The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is null, is not correctly aligned, or it points to an invalid address or a kernel mode address.
This function failed because the GDI device passed to it did not have any monitors associated with it. A certificate could not be returned because the certificate buffer passed to the function was too small.
DxgkDdiOpmCreateProtectedOutput could not create a protected output because the video present yarget is in spanning mode. DxgkDdiOpmCreateProtectedOutput could not create a protected output because the video present target is in theater mode. The function call failed because the display adapter's hardware functionality scan HFS failed to validate the graphics hardware.
DxgkDdiOPMConfigureProtectedOutput cannot enable the specified output protection technology because the output's screen resolution is too high. The operating system asynchronously destroyed this OPM-protected output because the operating system state changed. This error typically occurs because the monitor PDO associated with this protected output was removed or stopped, the protected output's session became a nonconsole session, or the protected output's desktop became inactive.
OPM functions cannot be called when a session is changing its type. This error is returned only if a protected output has OPM semantics. This error is returned only if a protected output has COPP semantics. This error implies that the data was corrupted while it was being transmitted from a monitor to a computer. The operating system asynchronously destroyed the monitor that corresponds to this handle because the operating system's state changed.
This error typically occurs because the monitor PDO associated with this handle was removed or stopped, or a display mode change occurred. This function can be used only if a program is running in the local console session. It cannot be used if a program is running on a remote desktop session or on a terminal server session.
The function failed because the specified GDI display device was not attached to the Windows desktop. This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them. A pointer parameter is invalid if it is null, is not correctly aligned, or points to an invalid address or to a kernel mode address. This function failed because the GDI device passed to it did not have a monitor associated with it.
An array passed to the function cannot hold all of the data that the function must copy into the array. The function failed because the current session is changing its type. This function cannot be called when the current session is changing its type. The BitLocker encryption key could not be obtained from the startup key or the recovery password. The system boot information changed or the TPM locked out access to BitLocker encryption keys until the computer is restarted. Boot debugging is enabled.
Bitlocker Drive Encryption failed to recover from aborted conversion. This could be due to either all conversion logs being corrupted or the media being write-protected. An attempt to allocate a hardware resource failed because the resource is used by another component. The current state of the specified port on this network interface does not support the requested operation.
The wireless LAN interface is in auto-configuration mode and does not support the requested parameter change operation. IPsec Dos Protection failed to create state because there are already maximum number of entries allowed by policy. IPsec Dos Protection received an IPsec negotiation packet for a keying module which is not allowed by policy. IPsec Dos Protection failed to create per internal IP ratelimit queue because there is already maximum number of queues allowed by policy.
The chain of virtual hard disks is inaccessible. The process has not been granted access rights to the parent virtual hard disk for the differencing disk. The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk. A differencing disk is indicated in its own parent chain.
There was an error opening a virtual hard disk further up the chain. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No.
Any additional feedback? Or the file or its shorcut is corrupt. The file may be blocked by Windows. Or it is blocked by the anti-virus software of your computer. Since the error message suggests that "you may not have the appropriate permissions to access the item", you should first check if you have the permission of the file or folder when Windows cannot access the file or folder. STEP 1. Right-click the inaccessible file or folder, and then select Properties from the drop-out menu.
STEP 2. Choose the Security tab and click your name under Group or User. STEP 3. If you don't have one of the permissions, click Edit and check the checkboxes for all the permissions. Select OK to confirm. As I have mentioned before, Windows cannot launch a program or open a file from a external or network drive that is not currently connected. So if you get the error when clicking a shortcut, check the location of its target file and see if the file is in an inaccessible location. Skipping VRAD during compile.
Fast Compile Selected! HashVec: point outside valid range Compile Complete for this module. Run VRAD during compile. HDR will be enabled for compiles. Full Compile Selected! Rectus View Profile View Posts. HashVec: point outside valid range You have a brush extending outside the valid map area.
It's probably caused by the compiler trying to fix an invalid brush. Once you run the troubleshooter, try installing the Epic Games Launcher again. If you've purcha. Epic Games Store.
0コメント